Experimental study of the dust-removal performance of a wet scrubber
Shengyong Hu1
Yang Gao1
Guorui Feng2
Fei Hu1
Changhe Liu3
Jihua Li3
1.College of Safety and Emergency Management Engineering,Taiyuan University of Technology,Taiyuan 030024,Shanxi,China2.College of Mining Engineering,Taiyuan University of Technology,Taiyuan 030024,Shanxi,China;Green Mining Engineering Technology Research Center of Shanxi Province,Taiyuan 030024,Shanxi,China3.Shandong New Sunshine Environmental Protection Equipment Co.,Ltd.,Zoucheng 273500,Shandong,China
摘要：A variety of dust control methods are often applied in coal mines,among which the application of wet scrubbers has proven to be an efficient technology for the removal of dust in airstreams,rather than diluting or confining the dust.In this paper,a wet scrubber design was developed.Based on a self-designed experimental test platform,the total dust concentration,respirable dust concentration,air volume,and average pressure drops of wet scrubbers with 12,16,20,and 24 blades were measured under different water intake conditions.The results show that the different water intake levels have only minimal effects on the air volume of the wet scrubbers.However,increased water intake had improved the dust removal efficiency of the wet scrubbers with the same number of blades.The wet scrubber with 16 blades was found to have the best dust removal efficiency at a water intake level of 1.35 m3/h.Its total dust and respirable dust removal efficiency reached 96.81％and 95.59％,respectively.The air volume was 200.4 m3/min,and the average pressure drop was determined to be 169.4 Pa.In addition,when the wet scrubber with 16 blades was applied in a coal preparation plant in China's Shanxi Province,it was observed that the total dust concentration had fallen below 8.1 mg/m3,and the respirable dust concentration had fallen below 5.9 mg/m3.Therefore,the results obtained in this research investigation provide important references for the use of wet scrubbers to improve coal production environmental conditions.
机标关键词：
论文发表日期：2021-06-30
在线出版日期：2025-08-15（本平台首次上网日期，不代表文献的发表时间）
页数：12( 228-239 )
英文信息